Guides · Medals

What drives the price of custom medals

Size, thickness, plating, colour fill, ribbon and the mould. A plain guide to what you are paying for in a custom finisher or award medal, and where the money goes.

A custom medal quote bundles several costs into one line. Knowing what sits inside it is the quickest way to see whether a price is fair, and which spec changes would move it.

The mould

Die-cast medals need a mould made for your design. It is a one-off cost, sometimes shown separately and sometimes spread across the unit price. Ask which, and ask whether the mould is kept for re-orders, because reusing it next year removes that cost.

Size and thickness

More metal costs more, but not in a straight line: a slightly larger diameter often changes the price less than an extra millimetre of thickness. Shapes with cut-outs or 3D relief take more finishing work than flat round designs.

Plating and colour

  • Plating: gold, silver, bronze, antique and two-tone finishes all price differently.
  • Colour fill: soft enamel is generally cheaper than hard enamel; more colours mean more handwork.
  • Back side: a blank back costs less than a second design or individual engraving.

Ribbon and packing

Ribbons can be stock colours, sublimated with your artwork, or woven. Individual bags or boxes add a little per unit and a lot of time if you would otherwise pack them yourself.

Quantity and timing

Setup is spread across the order, so per-unit price falls as quantity rises. Ordering early also keeps freight options open. When you compare quotes, compare the same spec at the same quantity, landed at your door.

Send one line. See what it should cost.

We price it landed through our own suppliers, next to what you pay now. Your supplier never hears from us.

Get a price check